HEAT outdoor kitchens
The special thing about the HEAT outdoor kitchens is the modularity, which allows countless variants. You can either use pre-configured variants or simply combine any modules with each other - completely tailored to your individual requirements.
All models are based on the HEAT grill stations, which is why they combine a huge grill area, plenty of power, infrared burners, side cookers and rear burners in Swiss made quality with plenty of storage space and work surface!

Outdoorchef Worktop Granit for Heat Cabinet Modules
Modular worktop for HEAT outdoor cabinets for an individual outdoor kitchen design
Made from particularly hard-wearing natural stone with an elegant finish - 12 mm
Weatherproof and heat-resistant
Abrasion and scratch resistant
Particularly easy to clean and hygienic
Equip your HEAT cabinet module with an elegant worktop made of high-quality granite. The black natural stone worktop with a material thickness of 12 mm is particularly weather-resistant and insensitive to moisture and UV radiation. The smooth and scratch-resistant surface makes the heat-resistant worktop very easy to clean.
€299.00*

Outdoorchef Worktop Stainless Steel for Heat Cabinet Modules
Modular worktop for HEAT outdoor cabinets for individual outdoor kitchen design
Made of robust and durable stainless steel
Particularly easy to clean and hygienic
Equip your HEAT cabinet module with a durable stainless steel worktop. The hygienic worktop is particularly easy to clean and is heat-resistant, water-resistant and weatherproof all year round. Greasy soiling, stains and encrustations can be removed without hesitation using intensive barbecue cleaners.
€299.00*

Outdoorchef Back Panel for Heat Grill Module X-515
Back panel for HEAT built-in station for free-standing installation
Compatible with HEAT X-515 RB grill module
Made of high-quality steel, with resistant powder coating for maximum durability
The rear panel is compatible with the HEAT X-515 grill module and ensures a uniform look at the rear of the outdoor kitchen if it is free-standing. The panel for the rear of the grill module is made of durable stainless steel with a hard-wearing powder coating.
€169.00*

Outdoorchef Back Panel for Heat Grill Module X-415 / X-245
Back panel for HEAT built-in station for free-standing installation
Compatible with HEAT X-415 RB grill module
Made of high-quality steel, with resistant powder coating for maximum durability
The rear panel is compatible with the HEAT X-415 and 245 grill modules and ensures a uniform look at the rear of the outdoor kitchen if it is free-standing. The panel for the rear of the grill module is made of durable stainless steel with a hard-wearing powder coating.
€149.00*

Outdoorchef Drawer Divider Wide for Heat Cabinet Module, Set of 2
Practical dividers for flexible insertion in HEAT drawers
For a better overview and tidier drawers
Fits in all big drawers of the HEAT modules
Made of high-quality stainless steel, with resistant powder coating for maximum durability
Set of 2 drawer dividers
Keep your drawers tidy and organized: The HEAT drawer dividers (wide) fit perfectly into large drawers of the HEAT outdoor kitchen modules and can be positioned flexibly. Thanks to the convenient division of the drawers, smaller accessories, grill plates, pizza stones and crockery can also be stored safely and neatly in the drawer. The dividers are made of stainless steel with a hard-wearing powder coating, making them easy to clean and highly durable.
€59.95*

Outdoorchef Spacer for Heat Grill Module
Prevents heat damage to the body of the HEAT outdoor kitchen modules
Easy to install between the grill module and the adjacent module
High-quality production from stainless steel, with resistant powder coating for maximum durability
The HEAT spacer protects your HEAT cabinet modules from heat damage to the body. The stainless steel spacer is placed directly between the cabinet module and an barbecue module of the HEAT outdoor kitchen and thus decouples both cabinets without an unsightly gap between the modules. The spacer is made of durable stainless steel with a hard-wearing powder coating.
€49.95*

Outdoorchef Plinth Panel for Heat Grill Module X-515 - Front
Faceplate for a clean front finish of the HEAT modules to the floor
Uniform appearance of the kitchen unit and protection against dirt under the module
Made of high-quality stainless steel with durable powder coating for maximum longevity
Fits on HEAT X-515 RB grill module
Close the open sides of your HEAT outdoor kitchen unit with the plinth panel and achieve a closed look “as if from a single piece”. The closed plinth also prevents dirt from getting under the kitchen. The plinth panel is compatible with the front of the HEAT X-515 RB grill module.
€39.95*

Outdoorchef Drawer Divider Narrow for Heat Cabinet Module, Set of 2
Practical dividers for flexible insertion in HEAT drawers
For a better overview and tidier drawers
Fits in all low drawers of the HEAT modules (top drawer)
Made of high-quality stainless steel, with resistant powder coating for maximum durability
Set of 2 drawer dividers
Ideal for the cutlery drawer: The HEAT drawer dividers (narrow) in a set of 2 practically divide the top drawer in HEAT outdoor kitchen modules into smaller compartments, making it ideal for storing cutlery, barbecue thermometers or skewers. This not only provides a better overview, but also protects barbecue accessories from damage and scratches. The dividers are made of stainless steel with a hard-wearing powder coating, making them easy to clean and particularly durable.
€39.95*

Outdoorchef Plinth Panel for Heat Grill Module - Side (1 pcs.)
Panel for a clean side finish of the HEAT modules to the floor
Uniform appearance of the kitchen unit and protection against dirt under the module
Made of high-quality stainless steel, with durable powder coating for maximum longevity
Compatible with HEAT X-415 RB and X-515 RB grill module
Close the open sides of your HEAT outdoor kitchen unit with the plinth panel and achieve a closed look “as if from a single cast”. The closed plinth also prevents dirt from getting under the kitchen. The plinth panel is compatible with a HEAT built-in station (415, 515), which is installed at the end/beginning of a kitchen unit. For a particularly long service life, the plinth panel is made of stainless steel with a durable powder coating.
€29.95*

Outdoorchef Plinth Panel for Heat Cabinet Module - Back
Panel for a clean back edge of the HEAT modules to the floor
Uniform appearance of the kitchen unit and protection against dirt under the module
Made of high-quality stainless steel, with resistant powder coating for maximum durability
Compatible with HEAT cabinet
The plinth panel for the HEAT outdoor kitchen provides a clean finish between the modules and the floor. The closed look has an elegant appearance and protects against dirt and moisture under the outdoor kitchen. The stainless steel panel is particularly durable thanks to its hard-wearing powder coating and is compatible with the cabinet module of the HEAT outdoor kitchen.
€29.95*

Outdoorchef Plinth Panel for Heat Cabinet Module - Front
Faceplate for a clean front finish of the HEAT modules to the floor
Uniform appearance of the kitchen unit and protection against dirt under the module
Made of high-quality stainless steel with durable powder coating for maximum longevity
Fits on HEAT cabinet module
Close the open sides of your HEAT outdoor kitchen unit with the plinth panel and achieve a closed look “as if from a single piece”. The closed plinth also prevents dirt from getting under the kitchen. The plinth panel is compatible with the front of the cabinet module.
€29.95*

Outdoorchef Plinth Panel for Heat Grill Module X-415 - Front
Faceplate for a clean front finish of the HEAT modules to the floor
Uniform appearance of the kitchen unit and protection against dirt under the module
Made of high-quality stainless steel with durable powder coating for maximum longevity
Fits on HEAT X-415 RB grill module
Close the open sides of your HEAT outdoor kitchen unit with the plinth panel and achieve a closed look “as if from a single piece”. The closed plinth also prevents dirt from getting under the kitchen. The plinth panel is compatible with the front of the HEAT X-415 RB grill module.
€29.95*

Outdoorchef Plinth Panel for Heat Cabinet Module - Side (1 pcs.)
Panel for a clean side finish of the HEAT modules to the floor
Uniform appearance of the kitchen unit and protection against dirt under the module
Made of high-quality stainless steel, with durable powder coating for maximum longevity
Compatible with HEAT cabinet module
Close the open sides of your HEAT outdoor kitchen unit with the plinth panel and achieve a closed look “as if from a single cast”. The closed plinth also prevents dirt from getting under the kitchen. The plinth panel is compatible with both cabinet modules of the HEAT outdoor kitchen and covers the side plinth when the cabinet module is at the end of the kitchen unit. For extra durability, the plinth panel is made of stainless steel with a hard-wearing powder coating.
€29.95*

Outdoorchef Verbindungs-Set für Heat Module
Verbindungsset um die einzelnen Module miteinander zu verbinden
Gewindestange mit Verschraubung zum Montieren
€19.95*

Outdoorchef Nivellierplatten-Set 4 Stk. für Heat Module
For additional levelling of the HEAT modules
Ideal for levelling out larger height differences at the installation site (kitchen feet can only be levelled by up to 20 mm)
Several panels can be laid on top of each other to compensate for slopes
Made from a durable and resistant material for outdoor use
€9.95*